Nokia Code function
*3370# This Nokia
code activates Enhanced Full Rate Codec (EFR) - Your Nokia cell phone uses the
best sound quality but talk time is reduced my approx. 5%
#3370# Deactivate
Enhanced Full Rate Codec (EFR)
*#4720# Activate Half
Rate Codec - Your phone uses a lower quality sound but you should gain approx
30% more Talk Time
*#4720# With this
Nokia code you can deactivate the Half Rate Codec
*#0000# Displays your
phones software version, 1st Line : Software Version, 2nd Line : Software
Release Date, 3rd Line : Compression Type
*#9999# Phones
software version if *#0000# does not work
*#06# For checking
the International Mobile Equipment Identity (IMEI Number)
#pw+1234567890+1#
Provider Lock Status. (use the "*" button to obtain the
"p,w" and "+" symbols)
#pw+1234567890+2#
Network Lock Status. (use the "*" button to obtain the
"p,w" and "+" symbols)
#pw+1234567890+3#
Country Lock Status. (use the "*" button to obtain the
"p,w" and "+" symbols)
#pw+1234567890+4# SIM
Card Lock Status. (use the "*" button to obtain the "p,w"
and "+" symbols)
*#147# This lets you
know who called you last (Only vodofone)
*#1471# Last call
(Only vodofone)
*#21# This phone code
allows you to check the number that "All Calls" are diverted to
*#2640# Displays
phone security code in use
*#30# Lets you see
the private number
*#43# Allows you to
check the "Call Waiting" status of your cell phone.
*#61# Allows you to
check the number that "On No Reply" calls are diverted to
*#62# Allows you to check
the number that "Divert If Unreachable (no service)" calls are
diverted to
*#67# Allows you to
check the number that "On Busy Calls" are diverted to
*#67705646# Phone
code that removes operator logo on 3310 & 3330
*#73# Reset phone
timers and game scores
*#746025625# Displays
the SIM Clock status, if your phone supports this power saving feature
"SIM Clock Stop Allowed", it means you will get the best standby time
possible
*#7760# Manufactures
code
*#7780# Restore
factory settings
*#8110# Software version
for the nokia 8110
*#92702689# Displays
- 1.Serial Number, 2.Date Made, 3.Purchase Date, 4.Date of last repair (0000
for no repairs), 5.Transfer User Data. To exit this mode you need to switch
your phone off then on again
*#94870345123456789#
Deactivate the PWM-Mem
**21*number# Turn on
"All Calls" diverting to the phone number entered
**61*number# Turn on
"No Reply" diverting to the phone number entered
**67*number# Turn on
"On Busy" diverting to the phone number entered
12345 This is the
default security code
press and hold # Lets
you switch between lines
No comments:
Post a Comment